K24a2 - AFI Turbo Kit - Pump Gas Dyno Tune

[top dead center]

Nhia has been a TDC customer for a while now. We've had his RSX-S in the shop on several occasions for upgrades and tune. He recently decided to get a turbo car, and bought this Midori Green EK hatch. We had the hatch in today for several repairs, and a tune on Hondata.



Here is the setup:

Bone Stock K24a2

AFI GT35R Turbo Kit

Walbro 255LPH Fuel Pump
Precision 1000cc Injectors
AEM Injector Driver
Hondata K Pro
Hondata 4 Bar MAP Sensor

Here are the results:

This chart is at 14 PSI. Nhia plans to come back soon to have us install ARP head studs, a Cometic Head Gasket, and new cams.

[JB]

This looks like the exact same setup Spent was running last time I saw his RSX, minus the bone stock motor of course.

Nice numbers for stock motor

[Clemsons2k]

Yummy

[Spent]

Click for vid: http://www.youtube.com/watch?v=9YFFjaavuHs
The following chart was the last run. All we did was lower vtec point and adjust down low to increase power and spool up. There was no sense in doing another full rpm run on a heat soaked setup when the top end was already tuned, hence the short run.