|
Autocross Help Thread 2/28/10
|
|
02-22-2010, 01:44 PM
(This post was last modified: 02-23-2010 09:08 AM by DNAgirl.)
Post: #1
|
|||
|
|||
|
Autocross Help Thread 2/28/10
The autocross is less than a week away!
As most of you know, everyone at the autocross works (usually the run right after the one in which you drove). However, we will also need additional help with the following: Setup - Zach, Robbie, Jon K. Registration - Keri Tech - David Elkin, Stefan Timing - Keri, Zach, Stefan Takedown - everyone (hopefully) Waivers (at least two people) - David Escobar, Cody Templet Course Design - Zach Karlye, I will call about the fire extinguishers. Will you still be able to pick them up? If you can help, please post up here! Thanks!! |
|||
|
02-22-2010, 02:07 PM
Post: #2
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
I will be there at 7 or 7:30 (whichever we usually do) and can help get things set up as normal. After that if Zach wants help with course design I can do that too.
Zach, do you have any ideas for a course? ![]() Joy...is not trying to pan a fast moving object at dusk with a point-and shoot... |
|||
|
02-22-2010, 05:55 PM
Post: #3
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
i'll be there bright and early with crap in tow as usual. i can prob help with timing at some point as well if you need me, and will prob be helping elkin with tech as usual.
![]() 1993 mustang 2.3l ^^so slow CSCC Treasurer 09-10 CSCC secretary 08-09 |
|||
|
02-22-2010, 06:19 PM
(This post was last modified: 02-22-2010 06:20 PM by zps2004.)
Post: #4
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
I do have a layout in mind. Should be simple and fun.
![]() RE-11's "Off the shelf" suspension DIYPNP megasquirt Exhaust + Launch Control = GOOOOOD http://www.DDMWorks.com |
|||
|
02-22-2010, 07:01 PM
Post: #5
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
I will still get the fire extinguishers, just let me know where and when to pick them up
2009 PR 2010 Secretary 2010 Civic EX Coupe |
|||
|
02-22-2010, 08:45 PM
Post: #6
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
Ok, I have updated the help list after discussing with the roommate. He may be able to get some of his little buddies to help with set-up as well, but the more people we have there setting up, the faster it will go!
|
|||
|
02-23-2010, 09:05 AM
Post: #7
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
If David and Keri are going to be there at the crack of dawn, I guess that means I will as well. Waivers it is!
-GT
|
|||
|
02-23-2010, 09:07 AM
Post: #8
|
|||
|
|||
| RE: Autocross Help Thread 2/28/10 | |||
|
02-23-2010, 04:41 PM
Post: #9
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
Hey Zach, which direction will the course go? I'm curious cause I have a tire that has some funky wear (i got it for free though) and I don't want that tire on the outside for the usual big sweeper in the back. Thanks.
1996 Formula WS6 2008 Mazda Speed3 |
|||
|
02-23-2010, 05:17 PM
Post: #10
|
|||
|
|||
|
RE: Autocross Help Thread 2/28/10
Just fyi, setup really needs to begin at 7 with the cone trailer and any major materials. This way you have an hour to setup everything which typically takes longer than you'd expect. Also, the biggest thing to focus on I suggest during setup is get plenty of people with Zach (3-4 people) to help with course design and you should be able to setup registration tent, papers, matls, bathroom, tech and paddock with 3 - 4 people. It seems best if the course is done about the time registration opens therefore you have a little time to let the safety steward walk it, make any adjustments and ensure timing chords are long enough for start/finish. That taking roughly 15 minutes means the course is ready to be opened for walking by roughly 8:15 or 8:20.
Just a few thoughts. Hope that helps guys. ![]() 2010 Mk6 Gti... No it's not a DSG
|
|||
|
02-23-2010, 05:49 PM
Post: #11
|
|||
|
|||
RE: Autocross Help Thread 2/28/10
(02-23-2010 04:41 PM)Coolant Wrote: Hey Zach, which direction will the course go? I'm curious cause I have a tire that has some funky wear (i got it for free though) and I don't want that tire on the outside for the usual big sweeper in the back. Thanks. It is going to be going clockwise. ![]() RE-11's "Off the shelf" suspension DIYPNP megasquirt Exhaust + Launch Control = GOOOOOD http://www.DDMWorks.com |
|||
|
« Next Oldest | Next Newest »
|






![[Image: e92ra.jpg]](http://people.clemson.edu/~rdselle/images/e92ra.jpg)
![[Image: 6007215597_ea2591ffc2.jpg]](http://farm7.static.flickr.com/6146/6007215597_ea2591ffc2.jpg)
![[Image: 230027_933473853878_12701044_44586934_71043_n.jpg]](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/230027_933473853878_12701044_44586934_71043_n.jpg)

![[Image: Gti.jpg]](http://i8.photobucket.com/albums/a33/rhennin/Gti.jpg)