Clemson Sports Car Club

Full Version: F22B2 - T3/T4 8PSI - Pump Gas Dyno Tune
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
This car belongs to Josh from Sumter (user name JoshuaM07). After installing the kit, he brought it to us for a tune on Crome Gold. He was looking for a little more power, while keeping a reliable Daily Driver with A/C and PS. After a repairing a few small issues on the dyno (blown manifold gasket and a few vacuum leaks) and installing the 3 Bar MAP Sensor, here are the results.

Here is Josh's setup:

All Stock F22B2

Top Mount Manifold
Super 60 turbo
2 1/2" downpipe
Full 2 1/2" exhaust
eBay FMIC
RS Style BOV

Walbro 255lph
DSM 450cc Injectors
B&M Adjustable FPR
GM 3 Bar MAP Sensor (Plans for more boost later)

MSD Ignition
MSD Plug Wires
BKR7E-11 Plugs @ .030"

[Image: 7-15-101.jpg]


This chart is fluctuating between 7.8 - 8.1 psi.

[Image: Josh_ACCORD_Tune.jpg]
Nice! I bet the car is fun to drive...

I wanna do a big turbo S2000...
Customer reports that he made a few passes at his local 1/8th mile drag strip. His best pass before turbo was in the 10.2 range. With the new turbo setup, on street tyres with minimal traction, he made several 9.1 sec passes. While far from a drag car, it's a respectable gain, and he's having a lot of fun with it.


.....and here's the video of one of the dyno runs. Click the picture for the video.

[Image: th_235WHPAccord.jpg]
I just realized you were talking about eighth mile...


Smile

Scorke
...Yeah... If only a bolt-on turbo kit could take a bone stock Accord into the 9 sec 1/4 mile realm.....
Haha thats why I scrolled up to check out the tires just to make sure it wasn't running 9's on the big track Smile

Hey the post says it has an F22 in it, who knew!

Scorke
Reference URL's