06-01-2010, 02:21 PM
Pages: 1 2
06-09-2010, 12:12 PM
Hows progress coming guys?
Scorke
Scorke
06-10-2010, 02:26 AM
(06-09-2010 12:12 PM)evilevo11 Wrote: [ -> ]Hows progress coming guys?
Scorke
they got the car done.
but one of the buddy's of the shop borrowed the car to go to the gas station to grab some beers.
he drank 3-4 on the way back.
got into a race with one of those old mopar turbo vans with an srt-4 swap.
it was a good race and he forgot to double clutch 4th, hit 2nd, revved the motor to roughly 13000 rpm.
the clutch blew up and almost came all the way through the firewall.
he swiss cheesed the block from the rods breaking and bent all the valves.
back to the drawing board!
j/k, waiting for an update too!
06-10-2010, 01:20 PM
Block is at the machine shop... We are just waiting for the parts to come in...We also had a couple other motors that were scheduled to be built before this one so once those are done we will assemble this one.. Shouldn't be too long..
06-10-2010, 05:23 PM
.020 over?
Staying with 9:1?
What sort of pistons/rods?
Scorke
Staying with 9:1?
What sort of pistons/rods?
Scorke
Pages: 1 2