10-20-2009, 12:06 AM
Well, the economy took a dump directly on me and I am having to sell my car.
Its a 1991 hardtop i use for hillclimbs and flat track events. I drive it every now and then to work and school and that's about it.
![[Image: 3885803819_c434faf1c8_o.jpg]](http://farm4.static.flickr.com/3481/3885803819_c434faf1c8_o.jpg)
![[Image: 3748873316_dc4d1319ee_b.jpg]](http://farm3.static.flickr.com/2527/3748873316_dc4d1319ee_b.jpg)
Currently it has poly bushings all around
front brake ducts
stainless brake lines all around
ebc yellow pads all around
ground control sleeve's 250/350 rates f/r
300zx wheels with kumho xs tires
1" front spacers
Custom cold air intake
custom exhaust
custom header
roll bar
sparco sprint driver's seat
momo suede wheel
This car is race ready with an scca logbook and prepared for scca level 4 events.
It does have some problems. The door was bent back at the last event so i have some paint chipping at the front of the drivers door and back of the fender and the door has a crease going down the front of it. Its missing a trim molding piece at the drivers front. The shocks need to be replaced.
I have just briefly described it, if you have ANY questions feel free to ask.
asking $4,000 no trades
Its a 1991 hardtop i use for hillclimbs and flat track events. I drive it every now and then to work and school and that's about it.
![[Image: 3885803819_c434faf1c8_o.jpg]](http://farm4.static.flickr.com/3481/3885803819_c434faf1c8_o.jpg)
![[Image: 3748873316_dc4d1319ee_b.jpg]](http://farm3.static.flickr.com/2527/3748873316_dc4d1319ee_b.jpg)
Currently it has poly bushings all around
front brake ducts
stainless brake lines all around
ebc yellow pads all around
ground control sleeve's 250/350 rates f/r
300zx wheels with kumho xs tires
1" front spacers
Custom cold air intake
custom exhaust
custom header
roll bar
sparco sprint driver's seat
momo suede wheel
This car is race ready with an scca logbook and prepared for scca level 4 events.
It does have some problems. The door was bent back at the last event so i have some paint chipping at the front of the drivers door and back of the fender and the door has a crease going down the front of it. Its missing a trim molding piece at the drivers front. The shocks need to be replaced.
I have just briefly described it, if you have ANY questions feel free to ask.
asking $4,000 no trades
. Looks like a fun car.